How does the Dean machine tool realize the tool? In fact, each kind of machine tool to the tool method is basically the same, first of all, the workpiece in the three-jaw chuck clamping after manual operation of the machine tool, the specific steps are as follows:

1. The coordinate system of machine tool is established by the operation of rear reference point. At this time, CRT will display the coordinate value of the current position of the tool holder center in the machine coordinate system.

2、使用选定的工具将工件外表面切成刀，保持X方向尺寸不变，Z方向尺寸不变，按编程零键，CRT屏幕显示零X、Z坐标值。After stopping the spindle, measure the diameter of the workpiece excircle D, press the zero key for programming.

3、CRT屏幕上显示的X、Z坐标值全部清零，其编程的零点设置功能在系统中完成。

4.工件坐标系中刀具点的当前位置位于编程零点处。

苏州翼马机电设备有限公司专业提供苏州斗山机床配件、机床更换、斗山配件中心、德国Bolon、德国Repin、德国WTO、雷尼绍等服务，诚信经营，欢迎来电洽谈!